| 序號 |
標準編號 |
標準名稱 |
標準英文名稱 |
| 1 |
NB/T 31106-2016 |
陸上風電場工程安全文明施工規范 |
Code for Safe and Civilized Construction of Onshore Wind Power
Projects |
| 2 |
NB/T 35040-2014 |
水力發電廠供暖通風與空氣調節設計規范 |
Design Code for Heating Ventilation and Air Conditioning of
Hydropower Plants |
| 3 |
NB/T 35042-2014 |
水力發電廠通信設計規范 |
Design Code of Communication for Hydroelectric Power Plants |
| 4 |
NB/T 35044-2014 |
水力發電廠廠用電設計規程 |
Specification for Designing Service Power System for Hydropower
Station |
| 5 |
NB/T 35009-2013 |
抽水蓄能電站選點規劃編制規范 |
Specification on Compiling Site Selection Planning for Pumped
Storage Power Stations |
| 6 |
NB 35011-2016 |
水電站廠房設計規范 |
Design Code for Powerhouses of Hydropower Stations |
| 7 |
NB/T 35090-2016 |
水電站地下廠房設計規范 |
Design Code for Underground Powerhouses of Hydropower Stations |
| 8 |
NB/T 35087-2016 |
水電工程鋼閘門液壓自動掛脫梁系列參數 |
Series parameters of hydraulically operated and automatically
engaged or disengaged beams for hoisting steel gates in hydropower
projects |
| 9 |
NB/T 47043-2014 |
鍋爐鋼結構制造技術規范 |
Technical specification for manufacture of boiler steel structures |
| 10 |
NB/T 20005.4-2012 |
壓水堆核電廠用碳鋼和低合金鋼 第4部分：主蒸汽系統、主給水流量控制系統、輔助給水系統和汽輪機旁路系統用鍛、軋件 |
Carbon steel and low alloy steel for pressurized water reactor
nuclear power plants—Part 4: The forged or rolled parts for use in
main steam systems, feedwater flow control systems, auxiliary
feedwater systems and turbine bypass systems |
| 11 |
NB/T 20005.5-2013 |
壓水堆核電廠用碳鋼和低合金鋼 第5部分：1、2、3級承壓鑄件 |
Carbon steel and low alloy steel for pressurized water reactor
nuclear power plants—Part 5: Class 1, 2 and 3 pressure retaining
castings |
| 12 |
NB/T 20005.9-2017 |
壓水堆核電廠用碳鋼和低合金鋼 第9部分：2、3級無縫鋼管 |
Carbon steel and low alloy steel for pressurized water reactor
nuclear power plants—Part 9: Class 2 and 3 seamless steel pipes and
tubes |
| 13 |
NB/T 20005.12-2017 |
壓水堆核電廠用碳鋼和低合金鋼 第12部分：主蒸汽系統、主給水流量控制系統、輔助給水系統和汽輪機旁路系統用無縫鋼管 |
Carbon steel and low alloy steel for pressurized water reactor
nuclear power plants—Part 12: Seamless pipes for main steam
systems,feedwater flow control systems, auxiliary feedwater systems
and turbine bypass systems |
| 14 |
NB/T 20005.13-2012 |
壓水堆核電廠用碳鋼和低合金鋼 第13部分：2、3級熱交換器傳熱管用無縫冷拔鋼管 |
Carbon steel and low alloy steel for pressurized water reactor
nuclear power plants—Part 13：Cold-drawn seamless steel tubes for
class 2 and 3 heat exchangers |
| 15 |
NB/T 20005.14-2012 |
壓水堆核電廠用碳鋼和低合金鋼 第14部分：2、3級對焊無縫管件 |
Carbon steel and low alloy steel for pressurized water reactor
nuclear power plants—Part 14: Class 2 and 3 butt-welding seamless
pipe fittings |
| 16 |
NB/T 20005.16-2012 |
壓水堆核電廠用碳鋼和低合金鋼 第16部分：主蒸汽系統用彎頭 |
Carbon steel and low alloy steel for pressurized water reactor
nuclear power plants—Part 16: Elbows for main steam systems |
| 17 |
NB/T 20005.17-2014 |
壓水堆核電廠用碳鋼和低合金鋼 第17部分：主蒸汽系統用推制彎頭 |
Carbon steel and low alloy steel for pressurized water reactor
nuclear power plants—Part 17: Push-bended elbows for main steam
systems |
| 18 |
NB/T 20007.8-2017 |
壓水堆核電廠用不銹鋼 第8部分：1、2、3級奧氏體不銹鋼無縫鋼管 |
Stainless steel for pressurized water reactor nuclear power
plants—Part8：Class 1, 2 and 3 austenitic stainless steel seamless
pipes and tubes |
| 19 |
NB/T 20007.9-2011 |
壓水堆核電廠用不銹鋼 第9部分：1、2、3級奧氏體不銹鋼對焊無縫管件 |
Stainless steel for pressurized water reactor nuclear power plants—
Part 9: Class 1, 2 and 3 austenitic stainless steel seamless
butt-welding pipe fittings |
| 20 |
NB/T 20007.10-2013 |
壓水堆核電廠用不銹鋼 第10部分：2、3級熱交換器傳熱管用冷軋、冷拔奧氏體不銹鋼無縫鋼管 |
Stainless steel for pressurized water reactor nuclear power plants
—Part 10: Cold rolled or cold drawn seamless austenitic stainless
steel tubes for class 2 and 3 heat exchangers |
| 21 |
NB/T 20007.20-2013 |
壓水堆核電廠用不銹鋼 第20部分：泵用馬氏體不銹鋼A、B、C類非承壓鑄造內件 |
Stainless steel for pressurized water reactor nuclear power
plants—Part 20: Martensitic stainless steel castings for
non-pressure-retaining category A, B and C internal parts for pumps |
| 22 |
NB/T 20007.28-2014 |
壓水堆核電廠用不銹鋼 第28部分：3級耐海水腐蝕奧氏體-鐵素體雙相不銹鋼承壓鑄件 |
Stainless steel for pressurized water reactor nuclear power
plants—Part 28: Class 3 pressure-retaining austenitic-ferritic
duplex stainless steel castings for seawater application |
| 23 |
NB/T 20007.29-2014 |
壓水堆核電廠用不銹鋼 第29部分：泵用奧氏體-鐵素體雙相不銹鋼A、B、C類非承壓鑄件 |
Stainless steel for pressurized water reactor nuclear power
plants—Part 29：Non-pressure-retaining category A, B and C
austenitic—ferritic duplex stainless steel castings for pumps |
| 24 |
NB/T 20008.13-2013 |
壓水堆核電廠用其他材料 第13部分：1、2、3級螺柱、螺栓、螺釘、螺桿和螺母 |
Other material for pressurized water reactor nuclear power
plants—Part 13: Class 1, 2 and 3 studs, bolts, screws, threaded rods
and nuts |
| 25 |
NB/T 20045-2011 |
壓水堆核電廠反應堆壓力容器安裝及驗收技術規程 |
Technical Regulation for Construction and Acceptance of the Reactor
Vessel Installation in PWR Nuclear Power Plant |
| 26 |
NB/T 20046-2011 |
壓水堆核電廠蒸汽發生器安裝及驗收技術規程 |
Technical Regulation for Construction and Acceptance of Steam
Generator Installation in PWR Nuclear Power Plant |
| 27 |
NB/T 20107-2012 |
壓水堆核電廠反應堆冷卻劑泵安裝技術規程 |
Technical Regulation for Construction of Reactor Coolant Pump
Installation in PWR Nuclear Power Plant |
| 28 |
NB/T 20378-2016 |
核電廠屏蔽混凝土配合比設計規程 |
Specification for Mix Proportion Design of Shielding Concrete for
Nuclear Power Plant |
| 29 |
NB/T 20391-2016 |
壓水堆核電廠鋼制安全殼組裝、安裝及驗收技術規程 |
Technical Specification for Assembly, Installation and Acceptance of
Steel Containment Vessel in PWR Nuclear Power Plants |
| 30 |
NB/T 20410-2017 |
核電工程纖維混凝土技術規程 |
TechnicalSpecification for Fiber ReinforcedConcrete in Nuclear Power
Engineering |
| 31 |
NB/T 20560.6-2019 |
壓水堆核電廠應急堆芯冷卻系統過濾器設計和性能評價 第6部分：化學效應試驗技術要求 |
Design and Performance Evaluation of Emergency Core Cooling System
Strainer for Pressurized Water Reactor Nuclear Power Plant Part 6:
Technical Requirements for Chemical Effects Testing |
| 32 |
NB/T 20005.2-2012 |
壓水堆核電廠用碳鋼和低合金鋼 第2部分：2、3級熱交換器管板鍛件 |
Carbon steel and low alloy steel for pressurized water reactor
nuclear power plants—Part 2：Forgings for class 2 and 3 heat
exchanger tube plates |
| 33 |
NB/T 20005.10-2013 |
壓水堆核電廠用碳鋼和低合金鋼 第10部分：用填充金屬焊接的2、3級鋼管 |
Carbon steel and low alloy steel for pressurized water reactor
nuclear power plants—Part 10: Class 2 and 3 pipes welded with filler
metal |
| 34 |
NB/T 20005.15-2013 |
壓水堆核電廠用碳鋼和低合金鋼 第15部分：用填充金屬焊接的2、3級管件 |
Carbon steel and low alloy steel for pressurized water reactor
nuclear power plants—Part 15: Class 2 and 3 pipe fittings welded
with filler metal |
| 35 |
NB/T 20555-2019 |
核電廠老化與壽命管理術語 |
Terminology of ageing and life management for nuclear power plants |
| 36 |
NB/T 20564-2019 |
壓水堆核電廠輻照燃料組件池邊檢查 |
Poolside inspection of irradiated fuel assembly in pressure water
reactor nuclear power plant |
| 37 |
NB/T 20565-2019 |
壓水堆核電廠燃料組件用鋯合金棒材和絲材 |
Zirconium alloy bars and wires for fuel assembly for pressurized
water reactor nuclear power plants |
| 38 |
NB/T 20566-2019 |
壓水堆燃料組件及相關組件抗震設計規范 |
Code for seismic design of fuel assembly and associated core
components in pressurized water reactors |
| 39 |
NB/T 20344-2015 |
核電廠安全級電子設備鑒定規程 |
Qualification procedure of safety class electronic equipment for
nuclear power plants |
