| 序號 |
標準編號 |
標準名稱 |
行業標準外文名稱 |
出版機構 |
| 1 |
NB/T 20005.7-2017 |
壓水堆核電廠用碳鋼和低合金鋼 第7部分：1、2、3級鋼板 |
Carbon
steel and low alloy steel for pressurized water reactor nuclear
power plants-Part 7: Class 1, 2, 3 plates |
原子能出版社 |
| 2 |
NB/T 20007.11-2013 |
壓水堆核電廠用不銹鋼 第11部分：用填充金屬焊接的1、2、3級奧氏體不銹鋼鋼管 |
Stainless
steel for pressurized water reactor nuclear power plants-Part 11:
Class 1, 2 and 3 austenitic stainless steel pipes welded with filler
metal |
原子能出版社 |
| 3 |
NB/T 20007.12-2013 |
壓水堆核電廠用不銹鋼 第12部分：用填充金屬焊接的1、2、3級奧氏體對焊不銹鋼管件 |
Stainless
steel for pressurized water reactor nuclear power plants-Part 12:
Class 1, 2 and 3 austenitic stainless steel butt-welding pipe
fittings welded with filler metal |
原子能出版社 |
| 4 |
NB/T 20007.52-2018 |
壓水堆核電廠用不銹鋼 第52部分：安全級設備用奧氏體不銹鋼棒和型鋼 |
Stainless
steel for pressurized water reactor nuclear power plants-Part 52:
Austenitic stainless steel bars and sections for safety related
components |
原子能出版社 |
| 5 |
NB/T 20549-2019 |
核安全相NB/T 關混凝土結構耐久性設計規范 |
Code for
durability design of nuclear safety related concrete structure |
原子能出版社 |
| 6 |
NB/T 20571-2019 |
壓水堆核電廠變頻屏蔽主泵調試技術導則 |
Commissioning technical guideline for variable frequency
canned-motor reactor coolant pump of PWR nuclear power plant |
原子能出版社 |
| 7 |
NB/T 20573-2019 |
壓水堆核電廠主蒸汽隔離閥調試技術導則 |
Commissioning technical guideline for main steam isolation valve of
PWR nuclear power plant |
原子能出版社 |
| 8 |
NB/T 20552-2019 |
壓水堆核電廠堆芯臨界硼濃度監督 |
Supervision of critical boron concentration in core at pressurized
water reactor nuclear power plants |
原子能出版社 |
| 9 |
20560.6-2019 |
壓水堆核電廠應急堆芯冷卻系統過濾器設計和性能評價 第6部分：化學效應試驗技術要求 |
Design
and performance evaluation of emergency core cooling system strainer
for pressurized water reactor nuclear power plant-Part 6: Technical
requirements for chemical effects testing |
原子能出版社 |
| 10 |
NB/T 20006.18-2019 |
壓水堆核電廠用合金鋼 第18部分：反應堆壓力容器整體頂蓋用錳-鎳-鉬合金鋼鍛件 |
Alloy
steel for pressurized water reactor nuclear power plants-Part 18:
Mn-Ni-Mo alloy steel forgings for closure heads of reactor pressure
vessel |
原子能出版社 |
| 11 |
NB/T 20006.19-2019 |
壓水堆核電廠用合金鋼 第19部分：反應堆冷卻劑泵泵殼用錳-鎳-鉬合金鋼鍛件 |
Alloy
steel for pressurized water reactor nuclear power plants-Part 19:
Mn-Ni-Mo alloy steel forgings for reactor coolant pumpcasings |
原子能出版社 |
| 12 |
NB/T 20562-2019 |
控制棒驅動機構耐壓殼密封焊縫無損檢測 |
Non-destructive testing for pressure housing seal weld of control
rod drive mechanism |
原子能出版社 |
| 13 |
NB/T 20009.1-2010 |
壓水堆核電廠用焊接材料 第1部分：1、2、3級設備用碳鋼焊條 |
Welding
material for pressurized water reactor nuclear power plants-Part 1:
Carbon steel covered electrodes for class 1, 2, 3 components |
原子能出版社 |
| 14 |
NB/T 20009.2-2010 |
壓水堆核電廠用焊接材料 第2部分：1、2、3級設備用低合金鋼焊條 |
Welding
material for pressurized water reactor nuclear power plants-Part 2:
Low alloy steel covered electrodes for Class 1, 2, 3 components |
原子能出版社 |
| 15 |
NB/T 20009.3-2010 |
壓水堆核電廠用焊接材料 第3部分：1、2、3級設備用不銹鋼焊條 |
Welding
material for pressurized water reactor nuclear power plants-Part
3:Stainless steel covered electrodes for Class 1,2,3 components |
原子能出版社 |
| 16 |
NB/T 20009.4-2013 |
壓水堆核電廠用焊接材料 第4部分：1、2、3級設備用鎳基合金焊條 |
Welding
material for pressurized water reactor nuclear power plants-Part
4:Nickel-based alloy covered electrodes for class 1,2,3 components |
原子能出版社 |
| 17 |
NB/T 20009.5-2013 |
壓水堆核電廠用焊接材料 第5部分：1、2、3級設備用碳鋼氣體保護電弧焊藥芯焊絲 |
Welding
material for pressurized water reactor nuclear power plants-Part 5:
Carbon steel flux cored electrodes for gas shielded arc welding of
class 1, 2, 3 components |
原子能出版社 |
| 18 |
NB/T 20009.6-2012 |
壓水堆核電廠用焊接材料 第6部分：1、2、3級設備用碳鋼氣體保護電弧焊焊絲 |
Welding
material for pressurized water reactor nuclear power plants-Part 6:
Carbon steel electrodes and rods for gas shielded arc welding of
class 1, 2, 3 components |
原子能出版社 |
| 19 |
NB/T 20009.7-2012 |
壓水堆核電廠用焊接材料 第7部分：1、2、3級設備用不銹鋼焊絲和填充絲 |
Welding
material for pressurized water reactor nuclear power plants-Part
7：Stainless steel wires and filler rods for class 1,2,3 components |
原子能出版社 |
| 20 |
NB/T 20009.8-2012 |
壓水堆核電廠用焊接材料 第8部分：1、2、3級設備用鎳基合金焊絲和填充絲 |
Welding
material for pressurized water reactor nuclear power plants-Part 8:
Nickel-based alloy wires and filler rods for class 1,2,3 components |
原子能出版社 |
| 21 |
NB/T 20009.9-2013 |
壓水堆核電廠用焊接材料 第9部分：1、2、3級設備埋弧焊用碳鋼焊絲和焊劑 |
Welding
material for pressurized water reactor nuclear power plants-Part 9:
Carbon steel wires and fluxes for submerged arc welding of class 1,
2, 3 components |
原子能出版社 |
| 22 |
NB/T 20009.10-2013 |
壓水堆核電廠用焊接材料 第10部分：1級設備埋弧焊用低合金鋼焊絲和焊劑 |
Welding
material for pressurized water reactor nuclear power plants-Part
10：Low alloy steel welding wire and flux for submerged arc welding
of class 1 components |
原子能出版社 |
| 23 |
NB/T 20009.11-2013 |
壓水堆核電廠用焊接材料 第11部分：1、2、3級設備埋弧焊用不銹鋼焊絲和焊劑 |
Welding
material for pressurized water reactor nuclear power plants-Part
11：Stainless steel wires and fluxes for submerged arc welding of
class 1,2,3 components |
原子能出版社 |
| 24 |
NB/T 20009.12-2013 |
壓水堆核電廠用焊接材料 第12部分：1級設備鎳基合金堆焊用焊帶和焊劑 |
Welding
material for pressurized water reactor nuclear power plants-Part 12:
Nickel-based alloy strip cladding with flux for class 1 components
|
原子能出版社 |
| 25 |
NB/T 20009.13-2013 |
壓水堆核電廠用焊接材料 第13部分：1、2、3級設備不銹鋼堆焊用焊帶和焊劑 |
Welding
material for pressurized water reactor nuclear power plants-Part
13：Stainless steel strips and fluxes for cladding of class 1,2,3
components |
原子能出版社 |
| 26 |
NB/T 20009.14-2013 |
壓水堆核電廠用焊接材料 第14部分：1、2、3級設備用硬質合金堆焊焊接材料 |
Welding
material for pressurized water reactor nuclear power plants-Part 14:
Hard facing welding consumables for class 1,2,3components |
原子能出版社 |
| 27 |
NB/T 20224-2013 |
壓水堆核電廠控制棒驅動機構設計制造規范 |
Design
and manufacture specification of control rod drive mechanism of
pressurized water reactor for nuclear power plant |
原子能出版社 |
| 28 |
NB/T 20343-2015 |
壓水堆核電廠反應堆壓力容器及反應堆冷卻劑系統管道和設備保溫層設計制造規范 |
Design
and fabrication specification for the thermal insulation of reactor
vessel and reactor coolant pipings and equipments of PWR nuclear
power plants |
原子能出版社 |
| 29 |
NB/T 20275-2014 |
壓水堆核電廠螺柱焊接規范 |
Stud
welding specification for pressurized water reactor nuclear power
plants |
原子能出版社 |
| 30 |
NB/T 20277-2014 |
A240（S32101）雙相不銹鋼焊接規范 |
Welding
specification for A240 (S32101) duplex stainless steel |
原子能出版社 |
| 31 |
NB/T 20292-2014 |
核電廠用鐵素體鋼韌脆轉變區參考溫度T0的測試方法 |
Test
method for determination of reference temperature, T0, for ferritic
steels in the ductile-to-brittle transition range for nuclear power
plants |
原子能出版社 |
| 32 |
NB/T 20436-2017 |
壓水堆核電廠水化學控制 |
Water
chemistry for pressurized water reactor nuclear power plant |
原子能出版社 |
| 33 |
NB/T 20439-2017 |
壓水堆核電廠反應堆壓力容器壓力-溫度限值曲線制定準則 |
Evaluation rules of pressure-Temperature limit curves for reactor
pressure vessel of pressurized water reactor nuclear power plants
|
原子能出版社 |
| 34 |
NB/T 20440-2017 |
壓水堆核電廠反應堆壓力容器防止快速斷裂評定準則 |
Assessment criteria for preventing fast rupture of reactor pressure
vessel of pressurized water reactor nuclear power plants |
原子能出版社 |
| 35 |
NB/T 20319-2014 |
壓水堆核電廠技術規格書編制準則 |
Compiling
criteria for technical specification for pressurized water reactor
nuclear power plant |
原子能出版社 |
| 36 |
NB/T 20157-2012 |
核電工程施工質量保證規定 |
Quality
assurance requirements for construction of nuclear power project |
原子能出版社 |
| 37 |
NB/T 20305-2014 |
重水堆核電廠熱傳輸支管老化管理指南 |
Aging
management guideline for feeders of pressurized heavy water nuclear
power plants |
原子能出版社 |
| 38 |
NB/T 20527-2018 |
重水堆核電廠一回路管道流動加速腐蝕管理指南 |
Flow
accelerated corrosion management guideline for primary loop piping
of pressurized heavy water reactor nuclear power plants |
原子能出版社 |
| 39 |
NB/T 20392-2016 |
非能動壓水堆核電廠壓力容器安裝及驗收技術規程 |
Technical
regulation for construction and acceptance of reactor vessel
installation in passive PWR nuclear power plant |
原子能出版社 |
| 40 |
NB/T 20377-2016 |
非能動壓水堆核電廠蒸汽發生器安裝技術規程 |
Technical
specification for installation of passive PWR steam generator |
原子能出版社 |
| 41 |
NB/T 20453-2017 |
非能動壓水堆核電廠主冷卻劑管道安裝技術規程 |
Technical
regulation for installation of primary reactor coolant piping in
passive pressurized water reactor nuclear power plant |
原子能出版社 |
| 42 |
NB/T 20273-2014 |
壓水堆核電廠放射性疏水和排氣設計準則 |
Design
criteria of radioactive drain and vent for PWR nuclear power plant |
原子能出版社 |
| 43 |
NB/T 20286-2014 |
非能動安全殼冷卻系統設計要求 |
Design
requirements of passive containment cooling system |
原子能出版社 |
| 44 |
NB/T 20264-2014 |
非能動堆芯冷卻系統設計要求 |
Design
requirements of passive core cooling system |
原子能出版社 |
| 45 |
NB/T 20324-2014 |
非能動堆芯冷卻系統定期試驗要求 |
Requirements for periodic tests of passive core cooling system |
原子能出版社 |
| 46 |
NB/T 20323-2014 |
非能動安全殼冷卻系統定期試驗要求 |
Requirements for periodic tests of passive containment cooling
system |
原子能出版社 |
| 47 |
NB/T 20291-2014 |
非能動壓水堆核電廠正常余熱排出系統設計準則 |
Design
criteria for passive PWR NPP normal residual heat removal system |
原子能出版社 |
| 48 |
NB/T 20381-2016 |
壓水堆核電廠化學和容積控制系統設計準則 |
Design
criteria for chemical and volume control system in pressurized water
reactor nuclear power plants |
原子能出版社 |
| 49 |
NB/T 20185-2012 |
壓水堆核動力廠廠內輻射分區設計準則 |
Design
criterion of radiation zoning inside of the PWR nuclear power plant |
原子能出版社 |
| 50 |
NB/T 20194-2012 |
壓水堆核電廠輻射屏蔽設計準則 |
Design
criterion of radiation shield in the PWR nuclear power plant |
原子能出版社 |
| 51 |
NB/T 20097-2012 |
壓水堆核電廠混凝土安全殼功能設計要求 |
Concrete
containment functional design requirements for PWR nuclear power
plant |
原子能出版社 |
| 52 |
NB/T 20429-2017 |
核電廠事故處理規程編寫要求 |
Requirements for preparation of emergency operating procedures for
nuclear power plants |
原子能出版社 |
| 53 |
NB/T 20276-2014 |
非能動壓水堆核電廠設備冷卻水系統設計準則 |
Design
criteria for component cooling system of passive pressurized water
reactor nuclear power plant |
原子能出版社 |
| 54 |
NB/T 20406-2017 |
壓水堆核電廠流體系統的安全殼隔離裝置 |
Containment isolation device for fluid system of pressurized water
reactor nuclear power plant |
原子能出版社 |
| 55 |
NB/T 20446-2017RK |
壓水堆核電廠主蒸汽系統設計要求 |
Main
steam system design requirement of pressurized water reactor nuclear
power plant |
原子能出版社 |
| 56 |
NB/T 20318-2014 |
核電廠安全重要儀表壓力變送器 |
Pressure
transmitter important to safety in nuclear power plants |
原子能出版社 |
| 57 |
NB/T 20178-2012 |
壓水堆核電廠核取樣系統設計準則 |
Design
criteria of nuclear sampling system of pressurized water reactor
nuclear power plant |
原子能出版社 |
| 58 |
NB/T 20188-2012 |
壓水堆核電廠重要廠用水系統設計準則 |
Design
criteria for essential service water system for pressurized water
reactor nuclear power plant |
原子能出版社 |
| 59 |
NB/T 20012-2019 |
壓水堆核電廠核安全相關混凝土結構設計規范 |
Design
code for nuclear safety related concrete structures for pressure
water reactor nuclear power plants |
原子能出版社 |
| 60 |
NB/T 20011-2019 |
壓水堆核電廠核安全相關鋼結構設計規范 |
Design
code for nuclear safety related steel structures for pressure water
reactor nuclear power plants |
原子能出版社 |
| 61 |
NB/T 20105-2019 |
核電廠廠房設計荷載規范 |
Load code
for the design of nuclear power plants building structures |
原子能出版社 |
| 62 |
NB/T 20006.15-2019 |
壓水堆核電廠用合金鋼 第15部分：承壓邊界用錳-鎳-鉬鋼厚鋼板 |
Alloy
steel for pressurized water reactor nuclear power plants-Part 15:
Mn-Ni-Mo steel plates for pressure-retaining boundaries |
原子能出版社 |
| 63 |
NB/T 35079-2016 |
地下廠房巖壁吊車梁設計規范 |
Design
Code for Rock-Bolted Crane Girders in Underground Powerhouses |
中國水利水電出版社 |
| 64 |
NB/T 35007-2013 |
水電工程施工地質規程 |
Geological Code of Construction Period for Hydropower Project |
中國水利水電出版社 |
| 65 |
NB/T 10075-2018 |
水電工程巖溶工程地質勘察規程 |
Specification for Karst Engineering Geological Investigation of
Hydropower Projects |
中國水利水電出版社 |
| 66 |
NB/T 35092-2017 |
混凝土壩溫度控制設計規范 |
Design
Code for Temperature Control of Concrete Dam |
中國水利水電出版社 |
| 67 |
NB/T 10074-2018 |
水電工程地質測繪規程 |
Specification for Engineering Geological Mapping
of
Hydropower Projects |
中國水利水電出版社 |
| 68 |
NB/T 10080-2018 |
水電工程陸生生態調查與評價技術規范 |
Technical
Code for Investigation and Assessment of Terrestrial Ecosystem for
Hydropower Projects |
中國水利水電出版社 |
| 69 |
NB/T 35061-2015 |
水電工程動能設計規范 |
Code for
Energy Economy Design of Hydropower Project |
中國水利水電出版社 |
| 70 |
NB/T 35078-2016 |
活塞組合式減壓閥基本技術條件 |
Fundamental technical requirements for piston combined pressure
reducing valve |
中國水利水電出版社 |
| 71 |
NB/T 31086-2016 |
風電場工程水土保持方案編制技術規范 |
Technical
Code on Preparation of Soil and Water Conservation for Wind Farm
Projects |
中國水利水電出版社 |
| 72 |
NB/T 31087-2016 |
風電場項目環境影響評價技術規范 |
Technical
Code for Environmental Impact Assessment of Wind Farm Projects |
中國水利水電出版社 |
| 73 |
NB/T 31088-2016 |
風電場安全標識設置設計規范 |
Code for
Design of Wind Farm Safety Signs Arrangement |
中國水利水電出版社 |
| 74 |
NB/T 35041-2014 |
水電工程施工導流設計規范 |
Design
Code of Construction Diversion
for
Hydropower Engineering |
中國水利水電出版社 |
| 75 |
NB/T 35056-2015 |
水電站壓力鋼管設計規范 |
Design
Code for Steel Penstocks of Hydroelectric Stations |
中國水利水電出版社 |
| 76 |
NB/T 31107-2017 |
低風速風力發電機組選型導則 |
Guide for
Type Selection of Wind Turbine Generator System for Low Wind Speed |
中國水利水電出版社 |
| 77 |
NB/T 35023-2014 |
水閘設計規范 |
Design
Code for Sluice |
中國水利水電出版社 |
| 78 |
NB/T 31105-2016 |
陸上風電場工程可行性研究報告編制規程 |
Preparation Specification for Feasibility Study Report of Onshore
Wind Power Projects |
中國水利水電出版社 |
| 79 |
NB/T 35096-2017 |
水電工程移民安置獨立評估規范 |
Code for
Independent Assessment for Hydropower Project Resettlement |
中國水利水電出版社 |
| 80 |
NB/T 32040-2017 |
光伏發電工程勞動安全與職業衛生設計規范 |
Code for
Design of Occupational Safety and Health of Photovoltaic Power
Projects |
中國水利水電出版社 |
| 81 |
NB/T 35102-2017 |
水電工程鉆孔土工原位測試規程 |
Specification for Soil Test in Situ in Borehole of Hydropower
Projects |
中國水利水電出版社 |
| 82 |
NB/T 35105-2017 |
水電工程電磁法勘探技術規程 |
Technical
Specification for Electromagnetic Exploration of Hydropower Projects |
中國水利水電出版社 |
| 83 |
NB/T 35106-2017 |
水電工程分標概算編制規定 |
Preparation regulation for sub-bidding budgetary estimate of
hydropower projects |
中國水利水電出版社 |
| 84 |
NB/T 31147-2018 |
風電場工程風能資源測量與評估技術規范 |
Technical
Code for Wind Energy Resource Measurement and Assessment of Wind
Power Projects |
中國水利水電出版社 |
| 85 |
NB/T 35017-2013 |
陶瓷涂層活塞桿技術條件 |
Specification of Ceramic Coated Piston
Rods |
中國水利水電出版社 |
| 86 |
NB/T 35020-2013 |
水電水利工程液壓啟閉機設計規范 |
Design
Specifications for Hydraulic Hoist in Hydropower and Water Resources
Projects |
中國水利水電出版社 |
| 87 |
NB/T 35039-2014 |
水電工程地質觀測規程 |
Specification for Geological Observation of Hydropower Projects |
中國水利水電出版社 |
| 88 |
NB/T 35054-2015 |
水電工程過魚設施設計規范 |
Design
Code for Fish Passage Facilities in Hydropower Projects |
中國水利水電出版社 |
| 89 |
NB/T 31085-2016 |
風電場項目經濟評價規范 |
Code for
Economic Evaluation of Wind Farm |
中國水利水電出版社 |
| 90 |
NB/T 35026-2014 |
混凝土重力壩設計規范 |
Design
Code for Concrete Gravity Dams |
中國水利水電出版社 |
| 91 |
NB/T 35037-2014 |
水電工程魚類增殖放流站設計規范 |
Code for
the Design of Fish Restocking Station of Hydropower Project |
中國水利水電出版社 |
| 92 |
NB/T 35086-2016 |
水電工程閘門止水裝置設計規范 |
Design
Code for Water Sealing Device of Gate in Hydropower Projects |
中國水利水電出版社 |
| 93 |
NB/T 31115-2017 |
風電場工程110kV～220kV海上升壓變電站設計規范 |
Code for
110 kV~220 kV Offshore Substation Design of Wind Power Projects |
中國水利水電出版社 |
| 94 |
NB/T 31117-2017 |
海上風電場交流海底電纜選型敷設技術導則 |
Guide for
Selection and Laying of AC Submarine Cables for Offshore Wind Power
Projects |
中國水利水電出版社 |
| 95 |
NB/T 35100-2017 |
水電工程覆蓋層預應力錨索技術規范 |
Technical
Code for Prestressed Anchor Cable on Overburden Layer of Hydropower
Projects |
中國水利水電出版社 |
| 96 |
NB/T 42163- 2018 |
小水電機組自并勵勵磁系統技術條件 |
Technical
specification for self-shunt excitation system of small hydropower
units |
中國電力出版社 |
| 97 |
NB/T 47004.1-2017 |
板式熱交換器
第1部分：可拆卸板式熱交換器 |
Plate
heat exchangers─Part1: Plate-and-frame heat exchangers |
北京科學技術出版社 |
| 98 |
SY/T 5038-2018 |
普通流體輸送管道用直縫高頻焊鋼管 |
Longitudinal seam HFW steel pipe for common fluid service pipeline |
石油工業出版社 |
| 99 |
SY/T 5037-2018 |
普通流體輸送管道用埋弧焊鋼管 |
Submerged arc-welded steel pipe for common fluid service pipeline |
石油工業出版社 |
| 100 |
SY/T 6530-2010 |
非腐蝕性氣體輸送用管線內涂層 |
Internal coating of line pipe for non-corrosive gas transmission
service |
石油工業出版社 |
| 101 |
SY/T 5600-2016 |
石油電纜測井作業技術規范 |
Technical specifications for operation of petroleum wireline logging |
石油工業出版社 |
| 102 |
SY/T 6958-2013 |
低溫石油鉆機和修井機 |
Petroleum drilling and workover rigs for low temperature conditions |
石油工業出版社 |
| 103 |
SY/T 5038-2018 |
普通流體輸送管道用直縫高頻焊鋼管 |
Прямошовные стальные трубы высокочастотной сварки для трубопроводов
транспортировки нормальных жидкостей |
石油工業出版社 |
| 104 |
SY/T 5037-2018 |
普通流體輸送管道用埋弧焊鋼管 |
Cтальные трубы дуговой сварки под флюсом для трубопроводов
транспортировки нормальных жидкостей |
石油工業出版社 |
| 105 |
SY/T 6266-2004 |
低壓玻璃纖維管線管和管件 |
Стекловолоконные трубопроводные трубы и фитинги низкого давления |
石油工業出版社 |
| 106 |
SY/T 6530-2010 |
非腐蝕性氣體輸送用管線內涂層 |
Внутреннее покрытие трубопроводных труб для транспортировки
некоррозионного газа |
石油工業出版社 |
| 107 |
SY/T 6958-2013 |
低溫石油鉆機和修井機 |
Нефтяные буровые установки и агрегаты для ремонта скважин в
низкотемпературной среде |
石油工業出版社 |
| 108 |
SY/T 6666-2017 |
石油天然氣工業用鋼絲繩的選用和維護的推薦作法 |
Рекомендуемая методика по выбору и
обслуживанию стальных канатов для нефтегазовой промышленности |
石油工業出版社 |
| 109 |
SY/T 6270-2017 |
石油天然氣鉆采設備 固井、壓裂管匯的使用與維護 |
Нефтегазовое бурильно-добывающее оборудование
Использование и техническое обслуживание манифольдов для
цементирования скважины и гидравлического разрыва пласта |
石油工業出版社 |
| 110 |
SY/T 5557-2016 |
石油天然氣鉆采設備 固井成套裝備 |
Нефтегазовое бурильно-добывающее оборудование
Комплектное цементировочное оборудование |
石油工業出版社 |
| 111 |
SY/T 5079-2014 |
油井測試設備 |
Оборудование для каротажа и испытания
нефтяных скважин |
石油工業出版社 |
| 112 |
SY/T 6637-2018 |
天然氣輸送管道系統能耗測試和計算方法 |
Energy consumption test and calculation method for natural gas
pipeline system |
石油工業出版社 |
| 113 |
SY/T 5391-2018 |
石油地震數據采集系統通用技術規范 |
General technical specification of the petroleum seismic data
acquisition system |
石油工業出版社 |
